Tier1 5 Micron 20 Inch x 4.5 Inch Whole House Sediment Water Filter Replacement Cartridge - 4-Pack

Whole house water filter systems are designed to be installed on the main water line entering your home, with the purpose of removing rust, sediment, chlorine, and other chemical contaminants from all the water that flows into your residence. Regardless of where you are in your house - whether it's the guest bedroom shower, the outdoor hose, the kitchen sink, or the bathroom - you and your family can enjoy clean, healthy, and great-tasting water.

Not only do whole house water filters provide the luxury of clean, great-tasting water from every faucet, but they can also help extend the lifespan of appliances that use water, such as dishwashers, water heaters, and washing machines. This is because the filters remove the sediment, chlorine, and other contaminants that would otherwise enter and potentially damage those appliances.

The Tier1 Whole House Filter Replacement Cartridge, compatible with Pentek DGD-5005-20 and 155358-43, is an affordable option that ensures high-quality water is delivered to every faucet in your home. This filter is designed to capture and remove virtually all types of sediment particles 5 microns or larger from your home's water supply. In addition to improving water quality, these filters help reduce the risk of sediment-related corrosion in your fixtures and appliances, while also ensuring your water tastes great.

The filter specifications are as follows: - Actual Size: 20 inches (length) x 4 1/4 inches (outside diameter) - Media: Spun Wound Polypropylene - Filter Life: 6 months - Micron: 5 Nominal - Flow Rate: 20 GPM

This filter is designed to fit filtration system housings that accept 20 x 4.5 inch cartridges and is capable of removing contaminants such as dirt, rust, corrosion, sand, sediment, and silt.

The installation process is straightforward: 1. Turn off the water supply. 2. Press the red pressure-relief button (if present). 3. Unscrew the housing, remove the large o-ring, and wipe it clean. 4. Discard the used filter cartridge. 5. Wash the housing with dish soap and warm water using a non-abrasive sponge or cloth, then rinse thoroughly. 6. Fill the housing 1/3 with water, add about 1 tablespoon of bleach, and scrub to disinfect. Rinse thoroughly. 7. Lubricate the o-ring with clean silicone grease and ensure it is seated level in the groove. 8. Insert the new filter cartridge. 9. Screw the housing onto the cap and hand-tighten (do not over-tighten). 10. Turn the water supply back on, press the pressure-relief button (if present), and check for leaks.

Investing in a sediment-reducing filter like this one can provide several benefits. Sediment in drinking water, while not necessarily harmful to humans or pets, can be an indication of lead or iron contamination, which can cause serious health issues. Sediment filters can also protect other appliances and possessions from the harmful effects of particles, which can cause staining, spots, and wear and deterioration on pipes and appliances. Additionally, if you already have other filtration media in place, a sediment filter can increase the lifespan of those filters by reducing the number of particles and contaminants that would otherwise wear them down.

product information: